Many of the products we offer include free setup and training when delivered by one of our company trucks. To learn which products include this service see the list below.

ST Saf-Tee Siper

/Tire Service/Siper/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The ST Saf-Tee Siper can sipe any tire from 12” to 24.5” with the adapters available. It’s easy too: operators can be trained in 15 minutes. Its fast: the process takes only 3 to 4 minutes per tire to perform. Any type of tire can be siped

STE-M Siper

/Tire Service/Siper/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The STE-M Tire Siping Machine allows the operator to sipe both non-mounted and mounted tires with the same machine. For non-mounted tires, expandable rims are available (13" to 24.5") to fit over standard expanding hub.

STE-M Siper -Angle Option

/Tire Service/Siper/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** This unit is identical to the STE-M model in every way accept for it allows varied angles for the sipe (normal siping is done at an 90 degree angle).

STG Siper/Groover Combination

/Tire Service/Siper/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The Model STG is an extremely versatile machine. It will static balance, sipe & groove - it can sipe any tire from 12” to 24.5” with the available adapters.

TC-50 Tire Cutter -Gas Engine

/Waste Management/Tire Cutter/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** This model comes equipped with a 9HP Briggs & Stratton Gasoline powered engine. Designed to cut passenger and light truck tires, 17” and smaller, into 4 pieces at the rate of 60 per hour. The patented shear blades work on a zero clearance design.

TC-100 Tire Cutter -Diesel Engine

/Waste Management/Tire Cutter/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** This model is equipped with a 18HP water cooled kubota diesel engine. The TC-100 is designed to cut passenger, light truck and heavy truck tires (including super singles). Passenger and light truck tires can be cut into 4 pieces at a rate of 120 per hour.

TC-100 Tire Cutter -Electric Motor

/Waste Management/Tire Cutter/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** This model is equipped with a 10 HP Electirc Motor 208/230/440. 60 Cycles 28GPM Pump, 3 Phase w / Mag. Start. The TC-100 is designed to cut passenger, light truck and heavy truck tires (including super singles).

TC-100 Tire Cutter

/Waste Management/Tire Cutter/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The TC-100 is designed to cut passenger, light truck and heavy truck tires (including super singles). Passenger and light truck tires can be cut into 4 pieces at a rate of 120 per hour using the optional passenger tire compressor.

TC-125 Tire Cutter

/Waste Management/Tire Cutter/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The TC-125 will cut any tire with a rim diameter of 23.5 to 25 inches. Construction tires and rear farm tires up to 52 inches in diameter can be cut with complete safety. This heavy duty tire cutter, weighing at 5,800 lbs.

TC-300 Wheel Crusher -Diesel Engine

/Waste Management/Wheel Crusher/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** This model is powered by a 18 HP Kubota Diesel w/ Electric Mag. Start. The TC-300 is our best selling wheel crusher. Dollar for dollar it’s the best wheel crusher on the market today!

TC-300 Wheel Crusher -Eletric Motor

/Waste Management/Wheel Crusher/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** This model comes with 10 HP electric motor 208/230/440 60 Cycles 28GPM pump, 3 Phase w/Mag. Starter.The TC-300 is designed to crush passenger and light truck wheels, 19” and smaller, at a rate of 120 per hour.

TC-300 Wheel Crusher

/Waste Management/Wheel Crusher/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** Powered by a 18 HP V-Twin gas engine with electric start. The TC-300 is our best selling wheel crusher. Dollar for dollar it’s the best wheel crusher on the market today!

TC-350 Wheel Crusher -Diesel Motor

/Waste Management/Wheel Crusher/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** A 16HP water cooled kubota diesel engine the TC-350 is designed to crush Dayton and Budd type over-the-road truck wheels. A hydraulic lift raises the tire and wheel to the crushing platform.

TC-350 Wheel Crusher

/Waste Management/Wheel Crusher/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** Powered by an 18 HP V-Twin gas or optional diesel engine the TC-350 is designed to crush Dayton and Budd type over-the-road truck wheels. A hydraulic lift raises the tire and wheel to the crushing platform without manual lifting.

TC-55 Tire Cutter

/Waste Management/Tire Cutter/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The TC-55 Tire Cutter is a very powerful machine for its size. The small footprint allows this workhorse to easily fit in any work area. The TC-55 is faster than its little brother the TC-50, and can handle high volumes of passenger or light truck size tires quickly.

TC-55 Tire Cutter (18 hp Gas Engine)

/Waste Management/Tire Cutter/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** With a larger motor and pump, the TC-55 is faster than its little brother the TC-50, and can handle high volumes of passenger or light truck size tires quickly.

TG-80 Tire Grooving Station

/Tire Service/Groover/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The TG-80 Tire Grooving Station will hold any tire for re-grooving from 15" to 24.5" on the quick-adjust hydraulic chuck operated by a foot valve. The TG-80 provides a straight or zigzag groove with less difficulty. The groover attachment accepts

TI-95 Tire Inspector

/Tire Service/Miscellaneous/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The TI-95 Tire Inspector tests all tires for sidewall, tread or bead leakage. The machine provides quick inspection and is very easy to use. Tire and hub assembly rotates easily, and all pneumatic controls are located on the side

TC-350 Wheel Crusher -Electric Motor

/Waste Management/Wheel Crusher/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** Equipped with a 10 HP Electric Motor 208/230/440 60 Cycles 28GPM Pump, 3 Phase w/ Mag. Starter the TC-350 is designed to crush Dayton and Budd type over-the-road truck wheels. A hydraulic lift raises the tire and wheel to the crushing platform.

SP Tire Siping Machine

/Tire Service/Siper/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** Exclusively designed for passenger car and light truck tires, the SP Siper is priced to fit a smaller budget.

TC-720 Vertical Recycling Baler

/Waste Management/Recycling Balers/ $0.00

Detail

		** CALL FOR CURRENT PRICING ** The TC-720 Vertical Baler is equipped with a heavy-duty 4" diameter bore hydraulic cylinder that produces an extremely tight, heavy bale. Along with a surprisingly small footprint this unit is constructed of heavy-duty high