Service Shop & Storage
11123 Repair Stand Platform
The 11123 Repair Stand Platform is designed to attach to the Branick Manual Tire Spreader (Branick Model 5040) as well as other manual tire spreaders. This simple proprietary product enhancement is a must if you own a manual tire spreader.
Call for Price
350B Back Buddy II™
The 350B Back Buddy II™ Hub and Drum Tool will make brake jobs easier and more profitable. This versatile tool was designed to prevent injuries from awkward lifting and keep workers' comp rates down. The Back Buddy II™ rolls under and bolts onto heavy drum and hub assembly, then handily rolls the assembly out and lays it over for servicing.
MSRP $1,395.00 - Call for Freight
6346 Complete PakPress® Kit
The 6346 Complete PakPress® Kit is a must if you're in the Fleet Maintenance industry. Don't be without this tool that brings the power of a 10-ton shop press right to the truck. Most impressive, the 1-PPK PakPress® lets you remove and install studs without removing the hub. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings. Any mechanic can use it and get the job done right in minutes.
MSRP $3,150.00
CH-14 Cheetah® Tool Organizer
The CH-14 Cheetah® Tool Organizer allows easy storage of some of the most common tire service tools. Built to last, the CH-14 Cheetah® Tire Tool Organizer is a valuable addition to any tire service environment. The extra long storage areas can accommodate a wide variety of tire tools, tire irons, bead breaking hammers and just about any tire changing tool. The rugged wheels help transport your tool center anywhere you may need it, quickly and easily.
MSRP $142.00
Cheetah® Hub Axle Stud Extractor
The patented Cheetah® Hub Axle Stud Extractor is the most innovative broken stud extracting tool on the market. It removes the broken axle studs without harming the other studs or the axle hub. Using the Cheetah® Hub Axle Stud Extractor technicians have the ability to drill a hole precisely in the center of the broken stud
MSRP $89.99
CHR-1 Cheetah® Safety-Flate
The CHR-1 Cheetah® Safety-Flate was developed for fleet service application. No guesswork, or inconsistency, when inflating 1 - 4 tires at a time. Do it with precision and safety using the pre-set inflation gauge and regulator assembly.
Call for Price
CRT-100 Core Retraction Tool
The TSI Core Retracting Tool CRT-100 is designed to reduce inflation/deflation time by allowing the operator to remove the valve core safely during the process. Using the CRT-100 eliminates the risk of eye injuries from “flying” valve cores. The operation is simple.
MSRP $39.95
DG-20 Digital Tire Inflator
The TSI DG-20 Digital Tire Inflator represents simply one of the most accurate and easy to use digital tire inflators on the market today. Featuring a large, clear & easy to read digital display with a back light feature, the DG-20 is designed and built for the toughest shop environments. The durable LCD display is further protected by a large full body rubber shock boot which is included. The DG-20 is programmable by the User to display in four units: PSI, BAR, KGF and KPA.
MSRP $49.00
HD-22 Clever Lever®
The HD-22 Clever Lever tire and wheel caddy is a life saver. Don't change another tire the hard way! The HD-22 Clever Lever® puts science back in this chore by providing just the right tool to remove and replace tires easily and safely. The Clever Lever® allows one person to easily move tires up to 300 lbs., helping to prevent back injuries and other costly insurance claims.
MSRP $180.00
HD-26 Clever Lever®
Don't change another tire the hard way! The HD-26 Clever Lever® puts science back in this chore by providing just the right tool to remove and replace tires easily and safely. The Clever Lever® allows one person to readily move tires up to 300 lbs., helping to prevent back injuries and other costly insurance claims. Fits tires from 36" to 48".
MSRP $205.00
PB-10 Budd Nut Holder
PB-10 Budd Nut Holder. Revolutionary PB-10 Nut Holder locks all outer wheel nuts to let you quickly remove inner cap nuts on a 10 hole, Budd wheel double nut system. The PB-10 easily sets in place over outer nuts and they’re all “locked” at once.
MSRP $135.00
SC99 Striver Tool™ S Cam Tool
The SC99 Striver S-Cam Tool is the easiest way to install and remove S-cam bushings. Have you ever had to rely on a screwdriver to remove an S-cam bushing? Not only is it crude and slow, but the wrong tool can damage the spider or the cam. The new and innovative SC99 Striver™ seal and bushing driver make S-camshaft maintenance quick and easy.
MSRP $69.00
Speedy Dayton Wheel Adapter
The Speedy Dayton Wheel Adapter allows easy mounting of 20”-22.5” rims, cutting balancing time in half for most applications. This unit works for all models of truck computer wheel balancers. This unit doubles your production of demountable rim balancing. Order optional adapter part # 233643 for 22"-24.5” rims.
Call for Price
SU 100A Stepper™.
The SU 100A Stepper™ gives you safe and secure footing while you work on truck and bus engines. This convenient tool goes over the front or rear tire of the vehicle to give you easier access to hard-to-reach places.
MSRP $125.00
TI-85 Lift Pad Holder
The TI-85 Lift Pad Holder helps organize your shop and create a safer more productive working environment. This handy automotive lift pad organizer will allow you to keep the shop floor clear from any lose lift pads that may become lost or damaged.
MSRP $65.00
TI-87 Cheetah® Storage Rack
Protect your Cheetah® Bead Seater and Cheetah® accessories investment. The TI-87 Cheetah® Storage rack is designed to be installed on a rack or wall to store your BS-07, CH-5(AL), CH-10(AL) and Ch-13AL Cheetah® Bead Seaters and accessories.
MSRP $65.00
TI-88 Wheel Weight Recycling Shelf
The TI-88 Wheel Weight Recycling Shelf is a convenient shelf mount system that is the ideal place for working with wheel weights. The TI-88 unit is perfect for storing new boxes of wheel weights on the lower shelf and allows for handy collection of the used weights on the top shelf.
MSRP $86.00
TW2000 Tweel Handler™
The TW2000 Tweel Handler™ is an amazingly versatile tool that allows truck mechanics to remove, install, rotate and transport single tire-and-wheel assemblies with ease. The vertical range of conventional wheel dollies is three or four inches, forcing you to kneel down to inspect tires, or use a floor jack to raise the tire up.
MSRP $1,525.00 - Call for Freight
VV3000 Versa Vac™
The VV 3000 Versa Vac Radiator Pressure Tester and Coolant Dam will pay for itself after just a few uses. Ingenious and simple, this new time saving tool holds the engine coolant in, even when pipe plugs, sensors or valves are removed for replacement or repair.
MSRP $395.00
WC-8 Wheel Weight Cart
WC-8 Wheel Weight Cart. Quickly and safely bring a total assortment of wheel weights from storage to the balancer with the WC-8 wheel weight cart. Save time, money and back injuries! Six sturdy shelves easily support 1800 lbs of wheel weights.
Call for Price
WS-05 Mobile Wheel Work Station
The WS-05 Mobile Wheel Work Station is designed for commercial truck tire and wheel changing. Features include: faster and more efficient tire changing operations; significant reduction in impact wrench damage; reduced operator body fatigue and potential back problems. **** Impact wrench NOT included***
Call for Price
WS-9 Wheel Weight Shelf
The WS-9 Wheel Weight Shelving system enables you to organize, categorize and store any variety and volume of wheel weights. Whether your shop is large or small the WS-9 Wheel Weight Shelf will eliminate your wheel weight storage problems.
Call for Price
350B Back Buddy II Options
350B Back Buddy Adapters
The 350B Back Buddy handles all hub and drum assemblies with universal reciever and adapter sets. A simple change of adapters transforms the tool in seconds from an inboard hub/drum lifting device to an outboard drum or spoke lifting device.
Call for Price
PakPress Options
1-PPK PakPress®
The 1-PPK PakPress® Portable Wheel Stud Remover and Installer is a must if you're in the Fleet Maintenance industry. Don't be without this tool that brings the power of a 10-ton shop press right to the truck. Most impressive, the 1-PPK PakPress® lets you remove and install studs without removing the hub. A two-hour job is done in twenty minutes, with no risk of damaging seals or bearings. Any mechanic can use it and get the job done right in minutes.
MSRP $2,950.00
6247 Pak Press® Cart
The 6247 PakPress® Cart makes easy job with 1-PPK PakPress® even easier and safer. There are many benefits and features to the operator when using the optional work station storage cart.
MSRP $200.00
